One tab for each physical metric, one way to read it.
Everything below is what the current version does today. Nothing here is a plan.
CRC errors
Tracks new CRC errors on every interface per sampling cycle, with the running total, sorted high to low so the failing port sits on top.
Optical Rx power
Reads the received power of each optic and compares it with a threshold. When Rx reads 0, the table shows N/A instead of 0.00 dBm so it is not mistaken for a real power level.
QoS Drop
Breaks drops down by Tail, RED and Rate-limit, per queue on each interface, with a percentage so you can see which queue is under load.
Fabric Drop and the PFE/Linecard tab
Watches drops on the switching plane per line card and PFE, with a dedicated tab listing PFE/Linecard state to narrow down hardware faults quickly.
Three router vendors
Juniper, Cisco and Huawei in one interface, so you do not open three different tools.
Export to xlsx and csv
The alarm list exports to csv (Free plan) or xlsx (Professional plan) for reports, for sending to partners, or for comparing with other data.
Scheduled digest emails
Instead of one email per event, the system sends a digest on the schedule you set, with the alarm table in the email body (Professional plan). See a sample on the Demo page.
Runs offline on Ubuntu 22.04
Installs on an Ubuntu 22.04 server with no Internet access. Monitoring data stays inside your own system.